obscreen/README.md

Obscreen

About

Use a RaspberryPi to show a full-screen Slideshow (Kiosk-mode)

Installation

sudo apt-get update
sudo apt-get install -y git chromium-browser unclutter

git clone https://github.com/jr-k/obscreen.git 
cd obscreen && pip3 install -r requirements.txt && cp data/slideshow.json.dist data/slideshow.json

Configure

Everything slideshow-related happens in the ./data/uploads folder.

• Put some images into the /data/uploads folder. Ideally with the same resolution of the screen (eg. 1920x1080px).
• Edit the slideshow.json
• Initialize base configuration (feel free to edit any value) sudo cp config.py.dist config.py

Run

Cli mode

./obscreen.py

Forever with systemctl

sudo cp system/obscreen.service /etc/systemd/system/obscreen.service
sudo systemctl daemon-reload
sudo systemctl enable obscreen.service
sudo systemctl start obscreen.service

You are done now :)

If everything is set up correctly, the RaspberryPi shall start chromium in fullscreen directly after boot screen and after some seconds of showing the date & time (default.html) your slideshow shall start and loop endlessly.

Additional

A. Hardware checks

• Basic Setup For basic RaspberryPi setup you can use most of the available guides, for example this one: https://gist.github.com/blackjid/dfde6bedef148253f987

• HDMI Mode You may need to set the HDMI Mode on the raspi to ensure the hdmi resolution matches your screen exactly. Here is the official documentation: https://www.raspberrypi.org/documentation/configuration/config-txt/video.md

However, I used this one: (2,82) = 1920x1080 60Hz 1080p

B. Nginx server to serve pages (useful for gzip compression for instance)

1. Install

sudo apt isntall -y nginx
sudo rm /etc/nginx/sites-enabled/default 2>/dev/null
sudo ln -s "$(pwd)/system/nginx-obscreen" /etc/nginx/sites-enabled
sudo systemctl reload nginx

2. Configure nano config.py

{
// ...
    "reverse_proxy_mode": True,
// ...
}