Reclame

About

Use a RaspberryPi to show a full-screen Slideshow (Kiosk-mode)

Installation TL;DR

sudo apt-get update && sudo apt-get dist-upgrade
sudo apt-get install -y git chromium-browser

git clone https://github.com/jr-k/reclame.git 
cd reclame && pip3 install -r requirements.txt && cp data/slideshow.json.dist data/slideshow.json
./reclame.py

Installation - step by step

Basic Setup

For basic RaspberryPi setup you can use most of the available guides, for example this one: https://gist.github.com/blackjid/dfde6bedef148253f987

HDMI Mode

You may need to set the HDMI Mode on the raspi to ensure the hdmi resolution matches your screen exactly. Here is the official documentation: https://www.raspberrypi.org/documentation/configuration/config-txt/video.md

However, I used this one: (2,82) = 1920x1080 60Hz 1080p

Installation of base software

sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
sudo apt-get install -y git chromium-browser

git clone https://github.com/jr-k/reclame.git 
cd reclame && pip3 install -r requirements.txt && cp data/slideshow.json.dist data/slideshow.json
./reclame.py

Prepare your Slideshow

Everything slideshow-related happens in the ./data/uploads folder.

• Put some images into the /data/uploads folder. Ideally with the same resultion of the screen (eg. 1920x1080px).
• Edit the slideshow.json

You are done now :)

If everything is set up correctly, the RaspberryPi shall start chromium in fullscreen directly after bootup and after some seconds of showing the date & time (default.html) your slideshow shall start and loop endlessly.